XIANGDA MACHINERY MANUFACTURE

MESTO MACHINERY EQUIPMENT

banner
Home » Product > Crusher > Mineral Processing
Product Categories
High Pressure Mill

High Pressure Mill

High Pressure Mill consists mainly of main engine, separator, blower, finished powder cyclone collector, bag filter and connecting pipe. It can produce a variety of non-flammable, non-explosive mineral powders with a Mohs hardness of less than 9.3 and humidity below 6%, such as barite, limestone, kaolinite, ceramics and slag. Product sizes can be adjusted from 80-425 mesh. If necessary, 30-80 mesh coarse powder can be produced by special equipment in the machine.

Send InquiryChat Now

Description

High Pressure Mill consists mainly of main engine, separator, blower, finished powder cyclone collector, bag filter and connecting pipe. It can produce a variety of non-flammable, non-explosive mineral powders with a Mohs hardness of less than 9.3 and humidity below 6%, such as barite, limestone, kaolinite, ceramics and slag. Product sizes can be adjusted from 80-425 mesh. If necessary, 30-80 mesh coarse powder can be produced by special equipment in the machine.

Parameter

Name

Capacity(t/h)

1.5-6.5

3-12

5-20

Model

Power (kw)

Model

Power
(kw)

Model

Power

(kw)

Main engine

Host machine

YGM9517

37

YGM4121

75

YGM160

132

Analytical  engine

  YGM9517 

5.5

YGM4121

7.5

YGM160

11

Draught fan

  YGM9517 

37

YGM4121

75

YGM160

132

Auxiliary Machines

  YGM9517 

 

YGM4121

 

YGM160

 

Dust removing equipment

YGM9517

 

YGM4121

 

YGM160

 

Controller
equipment

Jaw Crusher

PE200×350

7.5

PE200×400

15

PE250×750

22

Bucket Elevator

 

3

 

4

 

4

Feeder

 

0.2

 

0.2

 

0.2

Eontroller Cabinet

Special use

YGM9517

90.2

YGM4121

176.7

YGM9517

301.2

Working Principle

The original material is crushed to the required size and conveyed to the hopper by a bucket elevator and then fed continuously and continuously into the grinding chamber through a vibrating feeder for powder processing. The shovel scoops the material into the space between the roller and the ring, where the grinding roller itself and the material rotate about the vertical axis, and then the grinding ring is tightly squeezed due to centrifugal force to complete the grinding. After the High Pressure Mill analysis, the fine powder is transported to the cyclone collector by a blower and then output as a finished product.

The rough material will be recirculated through air to the grinding chamber for regrind. The material may contain some moisture and the pipe joints are not absolutely sealed, so outside air may be drawn in, which can disturb the air circulation balance, but can be achieved by adjusting the air tube between the blower and the main unit. In this way, excess airflow will be introduced into the baghouse, collecting the airborne powder and purging it to remove excess air.

Picture

image005.png

Hot Tags: high pressure mill, suppliers, manufacturers, factory, cheap, low price, for sale

Inquiry