XD10-15 revetment block making machine Simple introduction >>> XD10-15 revetment block making machine is an integration of mechanical, electric and hydraulic technologies; PLC can achieve electric and hydraulic synchronous or asynchronous; process can be automatically continuously...Send InquiryChat Now
XD10-15 revetment block making machine
Simple introduction >>>
XD10-15 revetment block making machine is an integration of mechanical, electric and hydraulic technologies; PLC can achieve electric and hydraulic synchronous or asynchronous; process can be automatically continuously completed: automatic feeding, special distribution device, automatic conveyer panel, automatic lifting die and lowering die, automatic vibration, and automatic carrying.
Four-column vibration and pressure method shaping machine.
The computer is of fault diagnosis system. Warning signal is propitious to eliminate the fault. Combined with remote controlling system, it can achieve scrutiny, controlling and diagnosising.
SPECIFICATIONS FOR XD10-15 kerbstone making machine
XD10-15 kerbstone making machine
Main vibration form
As per client local voltage
Clay, soil, cement or other construction dregs
This machine, is a newly designed in order to produce solid brick, interlocks, hollow block, curbstones and other concrete products as requested by the customer.
In one press it can produce 65-70 pcs solid bricks,40-45 pcs of interlocks, or 12 pcs of 20x40x20cm blocks.
The press time is 12--17 seconds.
It has two working system, it can work either on full automatic or semi automatic, depending on user preference.
The machine can be used with a stacking system or without a stacking system.
Movements on the block making system will be controlled by intelligent PLC system. Auto motion system via sensors in automatic machine. Machine press number, unit of block productions, hollow block problems on the machine can be seen on the PLC touch screen panel.
The stacked Pallet must be transported using a forklift for machines with a stacking system. The block making machine works on wooden pallets which are made of PVC or GMT materials.
There are two types of mortar preparation system it can be either manual or with automatic weighing system after the cement is dosed sand is been weighed then transported up to the mixer water is added then the all is mixed until a homogeneous mortar is obtained.
The XD10-15 revetment block making machine can make all kind of revetment blocks which can be used in river, reservoir, highway and other places slope protection.