Introduction of XD8-15 cement brick making machine XD8-25Automatic Block Making Machine (The machine can work automatically through PLC control system) The moulds can be customized according the demand of customers. XD8-15(8 stands for the production of hollow blocks 390x190x190mm is 8 pieces...Send InquiryChat Now
Introduction of XD8-15 cement brick making machine
XD8-25Automatic Block Making Machine (The machine can work automatically through PLC control system) The moulds can be customized according the demand of customers.
XD8-15(8 stands for the production of hollow blocks 390x190x190mm is 8 pieces every mould, and 25stands for every cycle for hollow blocks needs 23-25 seconds).
Space of Ground
Vibration Motor Power
Number of Workers
Cement, crushed stone dust, gravel, sand, coal fly ash, iron/aluminium dust, crushed cinder and some industrial wastes
Products of Machine
Hollow blocks, Solid bricks, Pavers, Kerbstone, Slope blocks, slabs, interlock bricks and so on.
Good Reasons to choose XD8-15
1. The balance system adopts four-pole guarding way with extended bush to ensure the exact movement of mould. Gear and shaft balance system can make male and female mould move stably.
2. The way of feeding is revolving, convective and compulsive to ensure block density and reduce feeding cycle. Gear driving mode of feeding is more steady. Feeder moving is two curved arms drived by two cylinders, which makes feeder move quickly, durablly, and steadly.
3. Stacker is controled by frequency conversion to adjust speed. The movement of stacker is flexible and steady.
The hydraulic system adopts proportion direction valve. The valve can adjust flow rate and buffer cylinder. Therefore, it can protect cylinder and extend life, and make operation steadily and quickly.
The vibration adopts frequency conversion technique. The assembly is oil immersed vibration. This improve high speed loading and makes concrete liquefied and air-outed. The five advantages is vibration assembly synchronization ,soft starter, densify block, electric saving and quick moulding.
High Automatic level:
Using Japanese Omron sensor as signal source and Germany Panasonic PLC as central processing unit to make oil system, air system, electric system and machanical system to be one part. The plant can work automatically and cyclically. Our technicians put fault diagnosis, problem alarming into computer by safety logic control. The screen will show fault and methods to client if there is some problems.
It adopts separation of high and low voltage electricity, low voltage controls high voltage technique. This will solve problem of high voltage interfere and ensure gaining of exact signal. It is safe for people and machine.