Our XD10-15 block making machine can make all kind of concrete bricks XD10 automatic brick making machine Big five advantages of automatic block making machines Our machines, with harmonic cooperation between mechanical, electrical and hydraulic machines functions, guarantee a reliable and high...Send InquiryChat Now
Our XD10-15 block making machine can make all kind of concrete bricks
XD10 automatic brick making machine
Main Technical Specifications
Production per Mould:
10 pcs/mould (Standard Block: 400x200x200mm)
|54 pcs/mould (Solid Block: 240x115x53mm)|
|27 pcs/mould (Interlock: 225x112.5x60mm)|
|35 pcs/mould (Holland Brick: 200x100x60-80mm)|
Production per Shift (8 Working Hours):
Hollow Block (400x200x200mm): 14400-19200 pcs
|Solid Block (240x115x53mm): 77760-103680 pcs|
|Interlock (225x112.5x60mm): 31104-38880 pcs|
|Holland Brick (200x100x60-80mm): 4032050400 pcs|
2940 rolls/minute or 50 HZ
7568x2060x2968mm (excluding electrical control box)
crushed stone, sand, cement, dust and coal fly ash, cinder, slag, gangue, gravel, perlite, and other industrial wastes
concrete blocks, solid/hollow/cellular masonry products, paving stones with or without face mix, garden and landscaping products, slabs, edgers, kerbstones, grass blocks, slope blocks, interlocking blocks, etc.
widely used in buildings, road pavings, squares, gardens, landscaping, city constructions, etc
Big five advantages of automatic block making machines
Our machines, with harmonic cooperation between mechanical, electrical and hydraulic machines functions, guarantee a reliable and high output production of concrete products.
1. Use Germany Siemens PLC control system and Siemens Touch Screen, use Schneider and Omron relays and contactors:
A. Siemens PLC, with great adaptability, guarantees the stability and reliability of the machine.
B. Visualization touch screen, with easy operation.
C. High-quality electrical components from Schneider and Omron.
2. Use Frequency Conversional Control Technology, which controls the block making:
A. Frequency Conversion Control: guarantees the precise and parallel movement between tamper head and mould, protects the products from transfiguration.
increases the production rate by improving the vibrating efficiency.
B. Controls the instantaneous start and stop of the motors, to protect the motor from over-heating caused by constant working.
C. Power saving: 30%.
3. Use Double high-dynamic Proportional/Directional Valves to automatically adjust the oil flow and pressure:
A. Buffer the hydraulic cylinder, to protect the cylinder from damage caused by inertia.
B. Guarantee production stability.
4. 360° Multi-Shaft Rotating and Compulsory Feeding:
A. Speedy and rotating feeding, with uniform mixing, to make sure that the density and intensity of the products are guaranteed
B. This uniform feeding is applicable for different kinds of raw materials and moulds.
5. Use heat treatment on moulds and main parts of the machines:
A. Heavy duty machine structure and wear resistant moulds;
B. The hardness reaches up to HRC 52-58;
C. Greatly improves the using lifetime of the machine by 50%.